CHENG POWER SYSTEMS,INC.
Los Altos, CA USA
+1(650) 941-9292
sales@chengpower.com
CHENG POWER SYSTEMS,INC.
Los Altos, CA USA
+1(650) 941-9292
sales@chengpower.com
The Cheng Cycle® is a patented technology for converting new and existing gas turbine plants to highly efficient & clean power generators that are especially beneficial for the peaking and intermediate load electrical power markets. There is less de-rating of the Cheng Cycle® at high temperatures and altitudes, and the Cheng Cycle® offers higher part-load efficiency.
The Cheng Cycle® has a small plant footprint area, produces very low emissions without additional active environmental controls, has fast startup and shutdown times and has demonstrated high reliability and long service life.
Cheng Cycle® is a patented technology for converting new and existing simple-cycle gas turbines to highly efficient and clean power generators that are especially beneficial for the peaking and intermediate load electrical power markets.
The Cheng Cycle® incorporates full heat recovery massive steam injection and uses an energy-storage heat-recovery steam generator (HRSG) design with automatic control of thermodynamic feedback for stable operation at maximum efficiency.
The Cheng Cycle® is recognized worldwide as a heat recovery steam injected gas turbine cycle and has 35 years of operating history.
Cheng Cycle® has been applied to Kawasaki M100-13 2.5 MW, RR Allison 501 6 – 8 MW, GE Frame 6B 42 MW, GE LM 2500 27.5 MW systems. Completed engineering for the retrofit of GE 7EA, 7FA, LM6000 PC, Westinghouse W501 D5A and 501F systems.
The Cheng Cycle® offers efficiencies equaling and capacities exceeding those of the combined-cycle plant for the underlying simple-cycle engine type without the steam turbine, steam turbine generator and associated cooling loop, control systems and auxiliaries of the combined-cycle plant.